中山[当地]软管泵 水渠机生产厂家

关于购买：
我们只做厂家直销！为您节省更多的钱！砍掉中间商的利润盘剥！直接给您出厂的价格！像我们这种的高质量产品，您从别的地方买，根本享受不到像我们这么优惠的出厂价格！同等的价格，我们保证质量更好！同等的质量，我们保证价格更低！                                   

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。

Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .